loading
reading
writing
saving
searching
Modified Poulan Wild Thing Chainsaw Chain Saw - $150 (North Syracuse)
QR Code Link to This Post
Timing has been tuned to run at 30 degrees btdc. Exhaust port work was performed to aid with high flow, chamber was opened significantly. Stock muffler has had the cat removed. The exhaust port was relocated to the front of the muffler and opened up to 80% of the cylinder head exhaust port diameter. The carburetor was rebuilt with new gaskets and a new diaphragm. The spark plug is new, the primer bulb is brand new, the fuel lines have been replaced in the last 3 months, along with a new fuel filter.
The saw was completely disassembled, checked, tested, and cleaned. There are no major scratches on any surface, the underside of the saw looks as close to new as you can get. The gas and oil tanks are as clean as can be. The bar has very minimal wear on it. The 18" bar rail has been evenly ground to remove surface imperfections. The bars roller tip was greased with Oregon grease. The oiler was completed disassembled, cleaned, and tested for proper functionality. The chain was sharpened by hand filing with the proper Oregon guided file setup and is very sharp. Chain has over 80% life remaining. Have only used Echo red armor 2 stroke oil since rebuild.
Aside from the exhaust port work performed, the cylinder head has had no other modifications done to it.
I believe that I have covered everything in this exhaustive ad. When I first acquired the saw it was kind of a dog when it was in the wood. Now this thing starts right up, it runs strong, and is quite loud, it now cuts wood with some serious authority for a 42cc saw! If you have any further questions please feel free to ask.